Abstract
AbstractA new color‐gradient lattice Boltzmann model is developed to simulate spontaneous imbibition in a porous media micromodel, which needs only two‐dimensional computational cost but considers essential three‐dimensional effects. A modified periodic boundary condition is introduced to deal with inlet and outlet boundaries with great ease and effectiveness. This model is first validated against analytical solutions and micromodel experiment. It is then used to study the spontaneous imbibition process in a homogeneous micromodel for varying viscosity ratios and contact angles. Depending on the viscosity ratio (λ) of wetting to nonwetting fluids, three different imbibition patterns are observed, namely unstable displacement (UD), stable displacement (SD), and crossover from UD to SD, which occur at , , and , respectively. When the crossover occurs, the wetting fluid saturation at breakthrough increases between two plateaus corresponding to UD and SD, respectively. Consistent with theoretical predictions from a single capillary, the wetting fluid saturation versus time follows the relation of for , and for . Due to the increased capillary valve resistance, increasing wetting phase contact angle is found to promote the flow instability, resulting in the development of preferential flow paths and thus some nonwetting fluid trapped in the flow direction. In addition, it is theoretically and numerically demonstrated that the effect of contact angle cannot be properly described by the theoretical equations derived from a single capillary because of the presence of capillary valve effect, which can be suppressed by decreasing contact angle or micromodel depth.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.