Population balance modelling for bubbly flows with heat and mass transfer

Abstract

Population balance equations combined with a three-dimensional two-fluid model are employed to predict bubbly flows with the presence of heat and mass transfer processes. Subcooled boiling flow belongs to this specific category of bubbly flows is considered. The MUSIG (MUltiple-SIze-Group) model implemented in CFX4.4 is further developed to account for the wall nucleation and condensation in the subcooled boiling regime. Comparison of model predictions against local measurements near the test channel exit is made for the radial distribution of the bubble Sauter diameter, void fraction, interfacial area concentration and gas and liquid velocities covering a range of different mass and heat fluxes and inlet subcooling temperatures. Additional comparison was also performed against existing boiling model in CFX4.4 and the modified model developed in our previous work (Int. J. Heat Mass Transfer 45 (2002) 1197). Good agreement is better achieved with the local radial bubble Sauter diameter, void fraction, interfacial area concentration and liquid velocity profiles against measurements using the newly formulated MUSIG boiling model over the simpler boiling models. However, significant weakness of the model is still evidenced in the prediction of the vapour velocity. Work is in progress to circumvent the deficiency of the model by the consideration of additional momentum equations or an algebraic slip model to account for bubble separation.