Abstract

Imminent necessity for eco-friendly and low-cost substitutes to peat is a defiance in the soilless plant cultivation systems. Wood biochar could entirely or partly substitute peat as a plant growing constituent to produce vegetables. Nevertheless, knowledge concerning potential plant performance of leafy green vegetables grown on wood biochar is restricted. The present study assessed the main physicochemical traits of various growing media constituted by decreasing the content of peat and by increasing the percentages of poplar wood biochar. Yield, nutritional and functional properties of curly endive plants cultivated in a protected environment were also tested. Biochar was pyrolyzed from poplar (Populus nigra L.) at 450 or 700 °C for 48 h. Increasing biochar concentration and pyrolysis temperature resulted in higher pH, EC and K content of the growing mediums. Biochar was also effective in increasing particle density and bulk density. Biochar at 70% and pyrolysis temperature of 450 °C significantly increased head fresh weight by 47.4%, head height by 24.9%, stem diameter by 21.5% and number of leaves by 80.8%, respectively compared with the control (100% peat). Head dry matter content, root dry matter content, SSC, ascorbic acid and total phenolic were also significantly affected by this treatment. Furthermore, the addition of biochar and the use of higher pyrolysis temperature decreased N leaves concentration. This represents a particularly important target for leafy green vegetables healthiness.

Highlights

  • IntroductionPeat is a restricted resource with a huge demand, and its extraction determines deleterious environmental impacts [2]

  • One of the most used substrate constituents for soilless vegetable cultivation is peat [1].peat is a restricted resource with a huge demand, and its extraction determines deleterious environmental impacts [2]

  • This is in accord with the results the pH detected in those growing media, which included up to 70% of biochar were in the 6.1–8.2 range

Read more

Summary

Introduction

Peat is a restricted resource with a huge demand, and its extraction determines deleterious environmental impacts [2]. Diverse organic resources might occupy an imperative function in lessening the C footprint of the horticulture production by completely or partially replacing peat-based substrates [3]. Biochar is a C-rich organic material, which is produced by thermal decomposition (pyrolysis) of plant-derived biomass in partial or total absence of oxygen [4]. As reported by Verheijen et al [5], the biomass-based materials are heated to temperature usually between 300 and 1000 ◦ C. Zhang et al [6] showed that heating time did not modify the properties of biochar, the pyrolysis temperature has a considerable impact on its physicochemical traits.

Objectives
Methods
Results
Discussion
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call