Pomegranate Peel-Derived Hard Carbons as Anode Materials for Sodium-Ion Batteries.

Abstract

Exploring high-performance carbon anodes that are low-cost and easily accessible is the key to the commercialization of sodium-ion batteries. Producing carbon materials from bio by-products is an intriguing strategy for sodium-ion battery anode manufacture and for high-value utilization of biomass. Herein, a novel hard carbon (PPHC) was prepared via a facile pyrolysis process followed by acid treatment using biowaste pomegranate peel as the precursor. The morphology and structure of the PPHC were influenced by the carbonization temperature, as evidenced by physicochemical characterization. The PPHC pyrolyzed at 1100 °C showed expanded interlayer spacing and appropriate oxygen group content. When used as a sodium ion battery anode, the PPHC-1100 demonstrated a reversible capacity of up to 330 mAh g-1, maintaining 174 mAh g-1 at an increased current rate of 1 C. After 200 cycles at 0.5 C, the capacity delivered by PPHC-1100 was 175 mAh g-1. The electrochemical behavior of PPHC electrodes was investigated, revealing that the PPHC-1100 possessed increased capacitive-controlled energy storage and improved ion transport properties, which explained its excellent electrochemical performance. This work underscores the feasibility of high-performance sodium-ion battery anodes derived from biowaste and provides insights into the sodium storage process in biomass-derived hard carbon.