Abstract
ABSTRACTCuraua fibers (CF) were fibrillated using high‐intensity ultrasonication, which is fast and uses water as a solvent. The fibrillated fibers (CFf) were used as reinforcement (20 wt %) in polypropylene composites processed by extrusion with or without 2 wt % of polypropylene grafted with maleic anhydride (PPMA). Fibrillation promotes an increase from 11.3 to 33.8 in the aspect ratio of the fiber. Sonication caused extraction of lignin and a decrease in the degree of crystallinity of the CF. Extrusion of the composites causes no additional fibrillation of the CF. A composite reinforced with CFf had tensile and flexural strength of 24.9% and 51.5%, respectively, higher than that of pristine PP. The use of PPMA and CFf in the composite promotes a further increase of 30% and 50.5% in these parameters, respectively. A thermal analysis of the composites using CFf with or without PPMA showed similar behavior. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017, 134, 44913.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
