Abstract
Composites of polyolefin matrices (HDPE and PP) were prepared by melt processing using two commercially available nano ZnO powders (Zinkoxyd aktiv and Zano 20). The mechanical and thermal properties, UV-Vis stability, and antibacterial activity of composites were studied. Tensile testing revealed that both nano ZnO types have no particular effect on the mechanical properties of HDPE composites, while some positive trends are observed for the PP-based composites, but only when Zano 20 was used as a nanofiller. Minimal changes in mechanical properties of composites are supported by an almost unaffected degree of crystallinity of polymer matrix. All polyolefin/ZnO composites exposed to artificial sunlight for 8–10 weeks show more pronounced color change than pure matrices. This effect is more evident for the HDPE than for the PP based composites. Color change also depends on the ZnO concentration and type; composites with Zano 20 show more intense color changes than those prepared with Zinkoxyd aktiv. Results of the antibacterial properties study show very high activity of polyolefin/ZnO composites against Staphylococcus aureus regardless of the ZnO surface modification, while antibacterial activity against Escherichia coli shows only the composites prepared with unmodified ZnO. This phenomenon is explained by different membrane structure of gram-positive (S. aureus) and gram-negative (E. coli) bacteria.
Highlights
Polymer nanocomposites with inorganic nanoparticles are propulsive fields of research due to innovative combination of properties, arising from the application of inorganic nanofiller
Since inorganic nanoparticles are mostly hydrophilic, they substantially differ in surface energy from the hydrophobic polymer matrices, causing phase segregation of both composite constituents
Samples of commercial zinc oxides (Zinkoxyd aktiv and Zano 20) were characterized before they were applied as the nanofillers
Summary
Polymer nanocomposites with inorganic nanoparticles are propulsive fields of research due to innovative combination of properties, arising from the application of inorganic nanofiller. The introduction of nanofillers into the polymer matrices, in most cases, generates relevant problems in terms of their dispersibility [1]. Due to a relatively small specific interface surface of agglomerates, they prevent efficient transfer of beneficial properties of the nanofiller, related to its nanoscopic dimension and to the host polymer, resulting in ‘nanofilled materials’ with properties similar to the traditional microcomposites [3]. In accordance with these considerations, it is clear that controlling the dispersion of Molecules 2019, 24, 2432; doi:10.3390/molecules24132432 www.mdpi.com/journal/molecules
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.