Abstract
AbstractBlends of poly(methyl methacrylate) (PMMA) with different composition viz., 5, 10, 15, and 20 wt % of ethylene‐vinyl acetate (EVA) copolymer were prepared by extrusion in a corotating twin screw extruder. These prepared PMMA/EVA blends have been characterized for physicomechanical properties such as density, surface hardness, izod impact strength, tensile strength, tensile elongation, and tensile modulus. The chemical aging and heat aging tests were performed on the blends by exposing them to different chemical environments and to 80°C for 168 h respectively. The influence of chemical aging and heat ageing on the mechanical performance of PMMA/EVA blends has been studied. The PMMA/EVA blends were also characterized for thermal properties such as vicat softening point (VSP) and melt flow index (MFI). That means significant improvement in impact strength of PMMA was noticed after incorporation of EVA into PMMA matrix and it lies in the range 19.1–31.96 J/m. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
