Polymer-Filler Interphase Dynamics and Reinforcement of Elastomer Nanocomposites

Abstract

The effect of polymer-filler interaction on interphase dynamics between filler particles in elastomer nanocomposites and the mechanisms of rubber reinforcement by carbon black (CB) are investigated with different techniques. To determine how polymer-filler interface influences the properties of the system, CB black was modified with the ionic liquid (IL) 1-allyl-3-methylimidazolium chloride (AMIC) and mixed with different, more or less, polar elastomers. For typical diene-elastomers (EPDM, SBR), this modification leads to a decreased polymer-filler coupling strength due to the coverage of active sites at the CB surface by AMIC. This is demonstrated by evaluating the energy site distribution from static gas adsorption isotherms with the polymer analogues gas 1-Butene. However, an improvement of polymer filler coupling was determined in the case of saturated, polar rubbers (HNBR) due to attractive dipolar interactions between the polar units of the polymer and the strongly adsorbed IL at the CB surface. The different couplings affect the polymer-filler interphase dynamics between filler particles, which determines the properties of the filler network and filler-filler bonds. To describe the effect of CB surface modification quantitatively, the Dynamic Flocculation Model (DFM) has been used to calculate polymer- and filler-specific material parameters from cyclic stress-strain measurements. The fitted data deliver a coherent picture of filler-filler- and polymer-filler couplings showing a characteristic dependence on rubber polarity. A confirmation of the effect of surface modification on the strength of filler-filler bonds is obtained by nonequilibrium molecular dynamics (MD) simulations of bond rupture under tension. They also provide indications for a glassy-like behavior of strongly confined polymer layers between attractive walls.