Abstract
Abstract Ultraviolet (UV) radiation monitoring films were prepared from solutions of polymers (polyvinyl, alcohol, PVA, or polyvinyl butyral, PVB), containing triphenyl tetrazolium chloride dye (TTC). These films have a pronounced response to the main UV radiation spectral regions [UV-A (400–320 nm), UV-B (320–280 nm), and UV-C (280–180 nm)] showing different sensitivities. PVA/TTC film has its maximum sensitivity in the UV-A region, while PVB/TTC film has its maximum sensitivity in the UV-C region. Both films have almost the same sensitivity in the UV-B region. The radiation-induced colour change is analysed spectrophotometrically at the maximum of the visible absorption band peaking at 492 nm wavelength. The measurement uncertainty of estimating ultraviolet radiation energy incident per unit area on the films is found to be about 3.5% (1 σ ). The study of the effect of radiance exposure, incident wavelength, and storage conditions have been carried out to characterise the use of these films for actinometric monitoring artificial ultraviolet radiation sources which are used for medical and industrial applications.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
