Polymer Stabilized Foam Rheology and Stability for Unconventional EOR Application

Abstract

Abstract It has been shownthat injecting surfactants into unconventional hydraulically fractured wells can improve oil recovery. It is hypothesized that oil recovery can be further improved by more efficiently distributing surfactants into the reservoir using foam. The challenge is that in high temperature applications (e.g., 240 F) many of these formulations may not make stable foams as they have only moderate foaming properties (short half-life). Therefore, we are evaluating polymers that can be used to improve foam stability in high temperature wells which has the potential to improve oil recovery beyond surfactant only injection.Surfactant stabilized nitrogen foams were evaluated using a foam rheometer at pressures and temperatures representative of a field pilot well. The evaluation process consisted of measuring baseline properties (foam viscosity and stability) of a surfactant stabilized foam without any added stabilizer. Next, conventional enhanced oil recovery polymers (HPAMs, modified-HPAMs, and nonionic polymers) were added at different concentrations to determine their impacts on foam stability. Our results demonstrate that inclusion of a relatively low concentration (0.05 wt% – 0.2 wt%) of polymer has a pronounced impact on foam stability. It was determined that reservoir temperature plays a key role in selecting astabilizing polymer. For example, at higher temperatures (>240 F), sulfonated HPAM polymers at just 0.2 wt% more than doubled the stability of the foam. The polymer that was selected from this lab work was tested in a foam field trial in an unconventional well. It is thought that improved foam stability could potentially help improve the distribution of surfactants in fracture network and further improve oil recovery.