Abstract
Polymer modified alkali treated jute fibre as a reinforcing agent, substantially improves the physical and mechanical properties of cement mortar with a mix design cement:sand:fibre:water::1:3:0.01:0.6. The workability of the mortar is found to increase systematically from 155±5mm (control mortar) to 167±8mm (0.2050% polymer modified mortar). The density of the mortar is increased from 2092kg/m3 to 2136kg/m3 with a concomitant reduction of both water absorption and apparent porosity. Optimal polymer content in emulsion (0.0513%) is found to increase the compressive strength, modulus of rupture and flexural toughness 25%, 28%, 387% respectively as compared to control mortar. Based on the X-ray diffraction and infra-red spectroscopy analyses of the mortar samples a plausible mechanism of the effect of modified jute fibre controlling the physical and mechanical properties of cement mortar has been proposed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.