Abstract

Feed-forward and feedback control is developed in this work for Polymer electrolyte membrane (PEM) fuel cell stacks. The feed-forward control is achieved using different methods, including look-up table, fuzzy logic and neural network, to improve the fuel cell stack breathing control and prevent the problem of oxygen starvation. Firstly, the feed-forward controller is used to generate directly an input voltage of the compressor according to the current demand. Then, a PID controller is used in the feedback to adjust the difference between the requested and the actual oxygen ratio by compensating the feed-forward controller output. The designed system is evaluated using a nonlinear simulation of a fuel cell model documented in the literature. The proposed feed-forward with PID controller have achieved a good control performance. The simulation showed effectiveness of the control strategy. Keywords: Fuel cell; fuel cell stack; breathing control; starvation; feed-forward; fuzzy logic; neural network International Journal of Engineering, Science and Technology, Vol. 2, No. 10, 2010, pp. 56-66

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.