Abstract
AbstractIn the present study, a polymer‐derived silicon oxycarbide (SiOC) ceramic layer has been coated on stainless steel 304 (SS304) to improve corrosion resistance in a seawater environment. The surface of SS304 is dip‐coated with vinyl‐functionalized polysiloxane, followed by pyrolysis under argon at 800°C to obtain SiOC layer with a thickness of about 1 μm after two‐fold coating/pyrolysis steps. Structural characterization of the samples was performed by fourier transform infrared (FTIR), X‐ray diffraction, Raman spectroscopy, and scanning electron microscopy. Electrochemical characterization of SS304 and SiOC‐coated SS304 is performed in 0.6 M NaCl solution. Potentiodynamic polarization measurements showed improved corrosion resistance of SiOC‐coated SS304 with a very low corrosion current density of 4.14 × 10−9 A/cm2 whereas for uncoated SS304 corrosion current density of 4.56 × 10−7 A/cm2 was measured. Electrochemical impedance spectroscopic study confirmed superior corrosion resistance behavior of SiOC‐coated SS304 over uncoated SS304.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: International Journal of Applied Ceramic Technology
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.