Abstract
We have studied health-monitoring systems using embedded optical fiber sensors for damage detection in FRP (Fiber Reinforced Plastics) composite laminates. For sensing of strain or temperature changes in these composite materials, we developed the FBG (Fiber Bragg Grating) sensors using the polyimide-coated small-diameter optical fiber with cladding diameter of 40 micrometers , which can be embedded in FRP composite laminates without inducing any structural defects. The FBG was subjected to high-temperature heat treatment at 300 degree(s)C in order to suppress the optical characteristics change of the FBG over a long period of time. Even after such high temperature treatment, the FBG retained sufficient mechanical strength and reflectivity. We embedded the FBG into FRP composite laminates and measured the optical characteristics against temperature and tensile strain. These experimental results show this type of the embedded FBG is very promising for practical health-monitoring systems. In addition, we have investigated various multipoint measuring systems and propose the time division multiplexing system using these FBG sensors.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.