Abstract
Fuel cladding and structural components made of zirconium alloys, used in light and heavy water nuclear reactors, exhibit, during normal operation, significant in-reactor deformation. Fast Fourier Transform (FFT) simulations have been conducted on large grain aggregates to simulate the in-reactor behavior of recrystallized Zircaloy-4. Original constitutive equations have been proposed to account, at the microscopic scale, for thermal creep, irradiation creep and irradiation induced growth. The evolution of irradiation defects with irradiation is taken into account, especially to deduce the local growth strain. A good description of the in-reactor behavior is obtained with irradiation defects evolution consistent with Transmission Electron Microscopy observations. The FFT simulations are compared to a self-consistent model. A good agreement is obtained when the behavior is linear (irradiation creep and growth) while the nonlinear response (thermal creep) is underestimated by the self-consistent model. The FFT simulations are also compared to the lower-bound model which neglects the interactions between grains. The lower-bound model underestimates the growth strain proving the importance of using an accurate polycrystalline model to predict the growth strain from the knowledge of the irradiation defect evolution.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.