Polyamide4‐block‐poly(vinyl acetate) via a polyamide4 azo macromolecular initiator: Thermal and mechanical behavior, biodegradation, and morphology

Abstract

ABSTRACTA series of polyamide4‐block‐poly(vinyl acetate)s were synthesized by the radical polymerization of vinyl acetate (VAc) using an azo macromolecular initiator composed of polyamide4 (PA4). The block copolymers were investigated by examining their molecular weight, structure, thermal and mechanical properties, biodegradation, and the morphology of the film surface. The compositions and molecular weights (Mw) ranging from 46,800 to 163,700 g mol−1 of the block copolymers varied linearly with increasing molar ratio of VAc to azo‐PA4. The block copolymers have high melting points of 248.2–262.5°C owing to PA4 blocks and heats of fusion, which were linearly dependent on the PA4 content. The mechanical properties of the block copolymers were monotonically dependent on the composition, i.e., increasing the PA4 content increased the tensile strength, whereas increasing the poly(vinyl acetate) content increased the elongation at break. The morphology of the block copolymers suggested the appearance of microphase separation. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015, 132, 42466.