Abstract
Polyamide 6-polyurethane (PA6-PU) block copolymers filled with graphite particles were prepared by anionic polymerization process. The friction and wear experiments were conducted using a UMT-3 machine with the chromium steel ball sliding on surface of the composites at high sliding speeds of 500rpm, 1000rpm and 1500rpm and loads of 78.5N and 157N. With adding of graphite, coefficient of friction and wear rate values of the composites decreased firstly, and then increased. And the influence of the applied load and sliding speed on tribological properties of the composites was explored in this study. The results showed coefficient of friction and wear rate values increased with the increasing of load. Coefficient of friction decreased and wear rate values increased with increasing of sliding speed. Microstructure of wear surface of the tested composites was inspected by scanning electronic microscope(SEM) and wear mechanism of the composites was studied.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
