Abstract
The effect of fullerene C60 on mechanical properties of polymer nanocomposites based on PA12 was investigated. The nanocomposites were prepared by in situ polymerization. The Young’s modulus and tensile strength of the polymer nanocomposites are improved by about 20% with loading of 0.02–0.08 wt.% the fullerene C60. Dielectric spectroscopy was used to investigate the influence of nanoparticles on the relaxation processes in polymer matrix. The segmental relaxation processes become faster with the fullerene C60 addition, an effect associated with a decrease of the glass transition temperature. In contrast, the secondary or γ relaxation process of PA12/ fullerene C60 nanocomposites was observed to slow down with addition of fullerene C60. These observations indicate that fullerene C60 as filler has an effect opposite to antiplasticizing that slow down the secondary relaxation (stiffening the material) in the glass state, while at the same time reducing the alpha relaxation time associated with cooperative segmental motions. It behaviour can be connected with inclusion complex formation between PA12 and fullerene C60.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.