Polyacrylate epoxide oligomers with robust photo‐crosslinked and thermomechanical properties enabled by controlling copolymerizing molecular weight distribution

Abstract

AbstractPhoto‐triggering curing coatings have advantages of improving production efficiency, reducing pollution emissions, and contributing to green environmental protection. However, making the trade‐off between appropriate viscosity and UV‐curing properties in a high‐performing polymer system remains a formidable challenge. In this paper, firstly, a series of acrylate copolymer oligomers (named as PAAR) were synthesized using methyl methacrylate (MMA), butyl acrylate (BA), and glycidyl methacrylate (GMA), then methacrylic acid (MAA) was grafted utilizing the reaction between carboxyl group in MAA with epoxy group in oligomer to introduce double bonds. By adjusting the oligomer molecular weight to control the viscosity and changing the GMA ratio to obtain suitable double bonds content. As a result, the number molecular weight (Mn) of the thus‐obtained PAAR oligomers were less than 3000 Da, and the polymer dispersity indexes (PDI) were lower than 1.8. Photo‐polymerization kinetics revealed that the coating prepared using the oligomers could be fully cross‐linked by UV light triggering within 60 s, achieving a high transparency of 90% along with favorable thermal and mechanical properties. Furthermore, it was confirmed that the water resistance on the surface of the cured films and hydrophobicity were more influenced by the presence of hydroxyl groups.