Abstract
AbstractTwo poly(vinylidene fluoride) (PVDF) membrane modification approaches, i.e., poly(vinylpyrrolidone) (PVP) modification and sulfonation, were applied and investigated to produce a fouling‐resistant membrane for microalgae filtration. Both methods were able to alter the membrane surface to become more hydrophilic. However, clean water permeance increased only for the PVP‐modified membranes, while the sulfonated membranes underwent a significant morphology transformation to a denser membrane and thus lower permeance. Microalgae filtration with PVP‐modified membranes showed less fouling compared to the pristine one, particularly in the beginning of the filtration, indicating that fouling reduction on these membranes mainly occurs in the initial fouling stage. Fouling is also found to be influenced by the microalgae species, possibly due to the different properties of the formed cake layer.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.