Poly-(vinyl alcohol) composite films reinforced with carboxylated functional microcrystalline cellulose from jute fiber

Abstract

Bio-based materials have attracted ample research interest due to their intrinsic beneficial impact on human society. Microcrystalline cellulose (MCC) extracted from a variety of bioresources is one of the most prominent candidate in this regard. Herein, the MCC was synthesized from jute fiber by a facile ammonium persulfate (APS) oxidation method resulting in carboxylic functional groups on the fiber surface. The carboxylated MCC was utilized to develop polyvinyl alcohol (PVA) composite films in a solution casting method. The surface chemistry, thermal properties, and surface morphology of MCC and MCC-PVA composite films were studied by FT-IR spectroscopy, thermogravimetric analysis, and scanning electron microscopy. The SEM images confirmed the rod-like MCC with average particle diameter 4.6 μm and length in 48.4 μm. The FT-IR spectroscopy suggested the complete removal of lignin and hemicellulose from jute fiber. A peak at 1730 cm−1 was introduced in MCC due to oxidation with APS. The MCC was readily dispersible in water, and chemical interaction with –OH group of PVA was spontaneous due to the carboxylation in MCC. The absorption peak of –OH groups in MCC-PVA composite films were shifted, somewhat disappeared and weakened due to the intra and intermolecular hydrogen bonding of MCC and OH groups in PVA. Thermogravimetric analysis expressed the thermal behavior of MCC and MCC-PVA composite films. The char formation at 500°C of the two different composite films was 15% and 16%, respectively. The stability of MCC-PVA composite films at elevated temperatures is the indication of potential application as flame retardant material.