Abstract

AbstractSummary: The thermal behaviour of poly(propylene terephthalate) modified with 2,2‐bis[4‐(ethylenoxy)‐1,4‐phenylene]propane terephthalate) units (PPT/BHEEBT copolymers) was investigated by thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and hot‐stage optical microscopy (MO). Good thermal stability was found for each sample. The thermal analysis carried out using the DSC technique showed that the Tm of the copolymers decreased with the increment in BHEEBT unit content. This was different from the Tg which, on the contrary, increased. Wide‐angle X‐ray diffraction measurements allowed the identification of the PPT crystalline structure in each semicrystalline sample. Multiple endotherms were shown in the PPT/BHEEBT samples, due to melting and recrystallisation processes, similarly to PPT. The $T_{\rm m}^ \circ $ of the copolymers was derived from the application of the Hoffman‐Weeks' method. The isothermal crystallisation kinetics were analysed according to Avrami's treatment. The introduction of BHEEBT units was found to decrease the crystallisation rate compared to pure PPT. Values of the Avrami's exponent n close to 3 were obtained for PPT/BHEEBT6 and PPT/BHEEBT12, regardless of Tc, in agreement with a crystallisation process originating from pre‐determined nuclei and characterised by three‐dimensional spherulitic growth. As a matter of fact, for these two copolymers, space‐filling spherulites were observed through optical microscopy at all Tcs. The heat of fusion (ΔHm) was correlated to the specific heat increment (Δcp) for samples with different degrees of crystallinity, and the results were interpreted on the basis of the existence of an interphase, whose amount was found to depend mainly on composition, despite the thermal treatment applied to the polymer also playing an important role.Calorimetric curves of PPT, PBHEEBT homopolymers and their random copolymers after melt quenching.magnified imageCalorimetric curves of PPT, PBHEEBT homopolymers and their random copolymers after melt quenching.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call