Abstract

Micro Fibrillated Cellulose (MFC) has emerged as a promising component in film formulations due to its unique barrier prope.rties. In this study, to best of our knowledge, cardanol, a biobased plasticizer derived from cashew processing, was employed for the first time, as a dispersing aid for MFC, during a liquid assisted extrusion technique with a Poly(lactic acid) (PLA)/Poly(butylene succinate adipate) (PBSA) blend. The aim of the work is the production of PLA/PBSA/MFC films for packaging applications. The addition of different MFC amount was investigated (added at 0.5, 0.75 and 1 wt.% concentrations). The results obtained are very interesting, in fact from one hand Cardanol improved the compatibility between PLA and PBSA and avoided the MFC agglomeration. On the other hand, micro fibrillated cellulose ensured a stable film blowing and the achievement of enhanced barrier properties, seal ability and mechanical resistance. In particular, the best result was obtained with an MFC content of 0.75 wt.% for which a good compromise in terms of films ductility, barrier properties and seal ability was achieved.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.