Abstract
This paper presents the design and simulation of polarization-independent type of metamaterial absorbers (MMAbs) at X-band frequency. The advantage of polarization-independent MMAbs is it can absorbs incident electromagnetic (EM) wave in all polarization states. It can be achieved by applying circular ring shape in a unit cell of MMAbs because the shape is very symmetry. The simulation is done in a unit cell for each proposed MMAbs structures. The FR4 substrate is used for MMAbs structure designs. The designed MMAbs structures can be divided into two parts which is circular ring and modified circular ring. The characteristics of both structure are studied through simulation process using CST software. Parametric study is conducted to observe the effect of each parameters in unit cell on the absorbing magnitude and frequency. It is observed that circular ring structures can achieve high EM wave absorbance for single band and multi band frequency. Since frequency separation distant limitation occurred, the modified circular ring structure is proposed by adding copper lines on the original circular ring structure. Thus, dual band frequency with close separation distant between two resonant frequencies is obtained as close as 1 GHz compared to the original dual band circular ring which is 2 GHz.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.