Polarization-Independent, Narrowband, Near-IR Spectral Filters via Guided Mode Resonances in Ultrathin a-Si Nanopillar Arrays

Abstract

We report the optical properties obtained through experiments, simulation, and theory of ultrathin (<0.1λ), amorphous Si nanopillar arrays embedded in a thin film of SiO_2 designed for narrowband filtering for multi- and hyperspectral imaging in the near-infrared. The fabricated nanopillar arrays are square-packed with subwavelength periodicity, heights of ∼100 nm, and a radius-to-spacing ratio, r/a, of ∼0.2. Specular reflection measurements at normal incidence demonstrate that these arrays behave as narrow stopband filters in the near-infrared (λ = 1300–1700 nm) and attain ∼90% reflectivity in band and a full width at half-maximum as low as 20 nm. Using a combination of full-wave simulations and theory, we demonstrate that these narrowband filtering properties arise from efficient grating coupling of light into guided modes of the array because the nanopillar arrays serve as photonic crystal slabs. This phenomenon is known as a guided mode resonance. We discover that the spectral location of these resonances is passively tunable by modifying array geometry and is most sensitive to nanopillar spacing. Theoretical photonic crystal slab band diagrams accurately predict the spectral locations of the observed resonance and provide physical insights into and support the guided mode resonance formulation. This work demonstrates that these ultrathin all-dielectric nanopillar arrays have advantages over existing hyperspectral filter designs because they are polarization independent, do not suffer from material absorption loss, and have significant implications for minimizing imaging device size.