Polarization and biomineralization of hydroxyapatite-barium titanate composites

Abstract

In the search of new materials for bone regeneration, the materials with piezoelectric properties look very promising. It has been reported that piezoelectric materials induce bone growth and enhance implant integration. Additionally, it has been found that bioactivity increases in negatively charge surfaces such as polarized BaTiO3 (BT) and polarized hydroxyapatite (HAp). Additionally, it is known that BaSO4 (BS) increases biocompatibility. Therefore, in this work, composites materials of 80BT/20BS (BTS) in different proportions with HAp (HAp/BTS: 10/90, 30/70, 50/50, 70/30 y 90/10) were prepared by a mixture of nanometric powders and then they were sintered at 1000 °C for a period of 5 h. The materials were polarized at 130, 300 and 400 °C applying a DC electric field of 1 kV/mm, during 1 h. The electric field was maintained until the material was cooled down to room temperature. The electric and piezoelectric response were measured immediately after cooling, after 1 h and after 24 h. The dielectric measurements of materials were performed at different frequencies (0.1 to 100 kHz). The polarized and unpolarized materials were immersed in simulated body fluid (1.5 SBF) for 7 and 19 days. The deposition and growth of hydroxyapatite using the biomimetic method was followed by FTIR and SEM. The polarization effect on the crystalline growth of hydroxyapatite formed from the SBF solution has been demonstrated. The process of biomineralization of HAp on HAp/BTS composites increased considerably with the addition of barium titanate, this effect greatly improved in polarized materials. The typical coral-like morphology characteristic of HAp formation from SBF deposition was observed after 7 days of SBF immersion for polarized composites. Excellent dielectric properties were determined by adding 30% Of BaTiO3, obtaining for these composites dielectric constant values of the order of 20 to 10 kHz, values similar to that of human bones. Therefore, these materials look very promising for bone regeneration.