Abstract
Radar polarimetry is a technology that overcomes the limitation between the radar resolution and the penetration depth of borehole radar. We have developed a stepped-frequency polarimetric borehole radar system. This is a polarimetric borehole radar system which measures the full-radar polarimetry in a borehole by changing the antenna arrangements. By using a network analyzer and an optical analog signal link, this system has a frequency bandwidth of 2–500MHz, which is suitable for two different antennas for radar polarimetry. We also propose a technique for polarimetric antenna calibration. In order to understand the potential of polarimetric borehole radar, field measurement were carried out at the Mirror Lake fractured-rock research site (NH, USA). The radar penetration depth from the borehole in the reflection measurement was over 10m, at the frequency range of 2–402MHz. We observed many clear reflections from fractures in each polarization status. Even in the raw data, we found the differences in the radar profile for different polarization status. We believe the polarimetric feature is closely related to the roughness of each fracture, and it is also related to the physical properties of the fracture such as water permeability.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.