Abstract
Femtosecond laser pulses were used for the direct point-by-point inscription of phase-shifted fiber Bragg gratings (FBGs) in a single fabrication step without postprocessing. An electro-optic amplitude modulator is used in the setup to generate a defined delay between two identical laser pulse trains for the grating inscription. The grating structure with a central phase shift is formed by focusing the modulated laser pulses into the core of a fiber, while the fiber is translated with a constant velocity. The induced phase shift leads to a narrow transmission band with a bandwidth considerably below 10 pm within the stop band of the FBG. The inscribed FBGs show a birefringence of 3.9×10(-5) whereas their temperature and strain sensitivities are 10.4 pm/K and 1.4 pm/μstrain, respectively. The fabrication process is fast and offers a high grade of flexibility for the control of all grating parameters.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
