Abstract

In an effort to increase spatial and temporal resolution of ultrafast electron diffraction and microscopy, ultra-high brightness photocathodes are actively sought to improve electron beam quality. Beam dynamics codes often approximate the Coulomb interaction with mean-field space charge, which is a good approximation in traditional beams. However, point-to-point Coulomb effects, such as disorder induced heating and the Boersch effect, can not be neglected in cold, dense beams produced by such photocathodes. In this paper, we introduce two new numerical methods to calculate the important effects of the photocathode image charge when using a point-to-point interaction model. Equipped with an accurate model of the image charge, we calculate the effects of point-to-point interactions on two high brightness photoemission beamlines for ultrafast diffraction. The first beamline uses a 200 keV gun, whereas the second uses a 5 MeV gun, each operating in the single-shot diffraction regime with $10^5$ electrons/pulse. Assuming a zero photoemission temperature, it is shown that including stochastic Coulomb effects increases the final emittance of these beamlines by over a factor of 2 and decreases the peak transverse phase space density by over a factor of 3 as compared to mean-field simulations. We then introduce a method to compute the energy released by disorder induced heating using the pair correlation function. This disorder induced heating energy was found to scale very near the theoretical result for stationary ultracold plasmas, and it accounts for over half of the emittance growth above mean-field simulations.

Highlights

  • The development of high-brightness photocathodes is a driving force in the improvement of electron accelerator technologies such as free electron lasers, energy recovery linacs, and ultrafast electron diffraction (UED) and microscopy

  • To show the generality of the new methods, we examine beam dynamics in two very different UED beam lines based on archetypes used in practice today: a 200 keV dc gun with lower total initial beam density (∼1017 m−3), and a high gradient 5 MeV rf photoinjector with higher initial beam density (∼1018 m−3)

  • We have shown that as photoemitted electron beam temperatures are made ever smaller, the effects of the point like nature of the Coulomb interaction become crucial to understanding photoinjector beam dynamics

Read more

Summary

INTRODUCTION

The development of high-brightness photocathodes is a driving force in the improvement of electron accelerator technologies such as free electron lasers, energy recovery linacs, and ultrafast electron diffraction (UED) and microscopy. The photocathode brightness is set by two parameters: the density of electrons emitted from the source, and their mean transverse energy (MTE), which acts as an effective beam temperature [5,6]. We provide a new method to compute the image force which is free of divergences and tuning parameters Using this model of the overall beam dynamics, we turn to introduce new microscopic figures of merit to disentangle the global and local effects of point-to-point interactions. We simulate two UED beam lines with 0 meV MTE with multiple methods of calculating the electrons interactions to show why these new methods are crucial for accurately determining the capabilities of these devices. We estimate the rms emittance increase attributable to DIH and find that it is the dominant source of emittance dilution in the two cases under study

POINT-TO-POINT SIMULATION METHODS
DESCRIPTION OF DC AND NCRF GUN UED BEAM LINES
MACROSCOPIC BEAM EVOLUTION
Cell Buncher
MICROSCOPIC EVOLUTION
Core emittance
Radial distribution function
DIH calculation
DIH density dependence
Core emittance and rms emittance contributions from DIH
Findings
CONCLUSION
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call