Abstract
Emission of particles less than 10 μm mean diameter (PM 10) from agricultural sources is an environmental issue due to health concerns and potential effects on local and global climate. The Columbia Plateau region of Washington and Oregon contains vast deposits of fine loess soils and is an active PM 10 emission source. An instrumented field site was established to continuously monitor meteorological conditions and PM 10 concentrations at 10 min intervals during periods of high winds (defined as sustained wind speeds >5 m s −1 at 2 m height) during the 2001 and 2002 field seasons. Time-integrated measurements of PM 10 and total soil movement were made using high volume air samplers (HiVols) and BSNE sediment traps, respectively. Particle impact sensors (Sensits ®) monitored particle movement (i.e. saltation) close to the surface. Tapered element oscillating microbalances (TEOMs) and wind velocity profiles were utilized to examine short-time-interval dust emission dynamics of fallow, dryland fields. TEOM data clearly identified periods of active PM 10 emission. TEOM and HiVol PM 10 concentrations integrated during high wind events (HWE) showed excellent agreement. Time-integrated PM 10 concentrations were well-correlated with horizontal soil mass transport. However, few saltator impacts were recorded during high wind events. Analysis of wind velocity profiles and friction velocities indicated little saltation was occurring. In general, for continuous emission of PM 10 from fallow fields with dust mulch conditions, threshold friction velocity was approximately 0.4 m s −1 and threshold velocity was approximately 8 m s −1. Several wind events showed evidence where PM 10 concentration gradients were extremely small, the PM 10 being well-mixed between 1 and 3 m heights.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.