PLD bioactive ceramic films: the influence of CaO–P2O5 glass additions to hydroxyapatite on the proliferation and morphology of osteblastic like-cells

Abstract

This work consists on the evaluation of the in vitro performance of Ti6Al4V samples PLD (pulsed laser deposition) coated with hydroxyapatite, both pure and mixed with a CaO-P2O5 glass. Previous studies on immersion of PLD coatings in SBF, showed that the immersion apatite films did not present the usual cauliflower morphology but replicated the original columnar structure and exhibited good bioactivity. However, the influence of glass associated to hydroxyapatite concerning adhesion, proliferation and morphology of MG63 cells on the films surface was unclear. In this study, the performance of these PLD coated samples was evaluated, not only following the physical-chemical transformations resulting from the SBF immersion, but also evaluating the cytocompatibility in contact with osteoblast-like MG63 cells. SEM and AFM confirmed that the bioactive ceramic PLD films reproduce the substrate's surface topography and that the films presented good adherence and uniform surface roughness. Physical-chemical phenomena occurring during immersion in SBF did not modify the original columnar structure. In contact with MG63 cells, coated samples exhibited very good acceptance and cytocompatibility when compared to control. The glass mixed with hydroxyapatite induced higher cellular proliferation. Cells grown on these samples presented many filipodia and granular structures, typical features of osteoblasts.