Abstract
Treatment of plastic waste by gasification in fluidized bed with air using dolomite as tar cracking catalyst has been studied. The gasifier has a 1 m high bed zone (diameter of 9.2 cm) followed by a 1 m high freeboard (diameter of 15.4 cm). The feedstock is composed of blends of plastic waste with pine wood sawdust and coal at flow rates of 1–4 kg/h. Operating variables studied were gasifier bed temperature (750–880 °C), equivalence ratio (0.30–0.46), feedstock composition and the influence of secondary air insertion in freeboard. Product distribution includes gas and char yields, gas composition (H 2, CO, CO 2, CH 4, light hydrocarbons), heating value and tar content in the flue gas. As a result, a gas with a medium hydrogen content (up to 15% dry basis) and low tar content (less than 0.5 g/m n 3) is obtained.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
