Abstract
Magnesium alloy components are mainly used in aerospace and automotive fields, but poor deformation ability at room temperature restricts their application in other industries. To address this issue, electrically-assisted technology is employed to enhance plasticity of alloys. However, conventional method weaken strength and intensify surface oxidation of such alloys because of prolonged action of current. In view of the above, pre-deformation (PF) treatment in combination with transient induced pulse current treatment (TIPCT) is proposed in the present work so as to balance between plasticity recovery and strength of AZ31B alloy. The results show that the total elongation of PF sample and the corresponding TIPCT specimen first increases and then decreases with the increase in PF percentage under the same voltage. At the same PF percentage, the total elongation of PF and TIPCT specimens also presents the same trend as the voltage increases. At the same time, the total elongation in PF and TIPCT specimens is greater than that of the as-received sample. The maximum total elongation is achieved at the PF percentage of 16 % and the voltage of 6 kV, being 35 % higher than that in the as-received sample. The improvement in total elongation is due to activation of more non-basal dislocations induced by TIPCT and the appropriate amount of microcracks generated by PF. In addition, the TIPCT process also improves the yield strength even if the PF percentage and voltage are changed. Besides that, the work hardening induced by PF treatment and instantaneous action of TIPCT process are the key factors enhancing yield strength. Moreover, comprehensive mechanical properties of TIPCT sample are found to outperform those after direct pulse current treatment (DPCT) under the same PF percentage. Therefore, the proposed composite process provides a feasible scheme to enhance strength and elongation of Mg sheets.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
