Abstract

The plastic deformation behaviour of single crystals of Pt3Al with the L12 structure having an off-stoichiometric composition of Pt-29at.%Al has been investigated in compression from 77 to 1273 K. The L12 phase is stable at least down to 70 K at a composition of Pt-29at.%Al, in contrast to Pt-27at.%Al, in which transformation into a tetragonal phase occurs at around 220 K. Slip occurs along 〈1 1 0〉 both on (0 0 1) and on (1 1 1) with slip on (0 0 1) being the primary slip system that operates at considerably smaller critical resolved shear stress (CRSS) values in most crystal orientations, except for a narrow orientation region close to [0 0 1]. The CRSSs for both slip on (0 0 1) and (1 1 1) decrease rapidly with increasing temperature at low temperatures, and they are both higher for Pt-29at.%Al than for Pt-27at.%Al due to solid-solution hardening effects. Dislocations with b (Burgers vector) = dissociate into two collinear superpartials with b = 1/2 separated by an APB (anti-phase boundary) on the corresponding slip plane for both slip on (0 0 1) and (1 1 1). The large negative temperature dependence of CRSS for slip on (1 1 1) at low temperatures is not due to the motion of superlattice intrinsic stacking fault (SISF)-coupled superpartials with b = 1/3〈1 1 2〉 but is due to the Peierls mechanism acting on APB-coupled superpartials with a non-planar core structure. The core of APB-coupled superpartials gliding on (0 0 1) is considered to be planar, and hence, the large negative temperature dependence of CRSS for slip on (0 0 1) is due to solid-solution effects arising from the off-stoichiometric composition.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.