Plasmonic nanostructures based on block copolymer templates for efficient organic solar cells

Abstract

Plasmonic nanostructures fabricated from self-assembled patterns of block copolymers (BCPs) were applied for organic solar cells (OSCs). A thin film of a cylinder-forming polystrene-block-poly(2-vinylpyridine) copolymer (PS-b-P2VP) was spin-coated on the transparent electrode of the OSCs, where nanostructures such as dot, dot with mixed line, and line patterns emerged during different solvent annealing processes. Selective conversion of hydrogen tetrachloroaurate (III) (HAuCl4) in P2VP blocks yielded gold (Au) nanostructures, which were used to trigger the localized surface plasmonic resonance (LSPR) effect at the OSCs. Plasmonic nanostructures with almost similar scales of BCP patterns were formed at the anode/buffer interface at the OSC, showing no-table enhancements of the short circuit current (J sc) and the power conversion efficiency (3.57% for the reference compared to 4.35% for the optimum LSPR-OSC) as the size and the anisotropy of Au patterns changed from a simple dot through an integrated dot-line pattern to a line pattern. Based on the experimental analyses of the light absorption, photoluminescence, and exciton lifetime of OSC, such an enhancement would be mainly attributed to size-dependent LSPR-induced scattering and absorption at the OSC’s active layer, which is not in intimate contact with the Au nanostructures. Up to a 26% increase in the power conversion efficiency could be observed at the plasmonic structures from BCP template, providing an accurately tuning and powerful tailoring of the LSPR-enhancing patterns for the OSCs.