Plasmonic Nanoneedle Arrays with Enhanced Hot Electron Photodetection for Near‐IR Imaging

Abstract

AbstractHot electron photodetection based on metallic nanostructures is attracting significant attention due to its potential to overcome the limitation of the traditional semiconductor bandgap. To enable efficient hot electron photodetection for practical applications, it is necessary to achieve broadband and perfect light absorption within extremely thin plasmonic nanostructures using cost‐effective fabrication techniques. In this study, an ultrahigh optical absorption (up to 97.3% in average across the spectral range of 1200−2400 nm) is demonstrated in the ultrathin plasmonic nanoneedle arrays (NNs) with thickness of 10 nm, based on an all‐wet metal‐assisted chemical etching process. The efficient hot electron generation, transport, and injection at the nanoscale apex of the nanoneedles facilitate the photodetector to achieve a record low noise equivalent power (NEP) of 4.4 × 10−12 W Hz−0.5 at the wavelength of 1300 nm. The hot‐electron generation and injection process are elucidated through a transport model based on a Monte Carlo approach, which quantitatively matches the experimental data. The photodetector is further integrated into a light imaging system, as a demonstration of the exceptional imaging capabilities at the near‐IR regime. The study presents a lithography‐free, scalable, and cost‐effective approach to enhance hot electron photodetection, with promising prospects for future imaging systems.