Plasma–tungsten interactions in experimental advanced superconducting tokamak (EAST)

Abstract

Tungsten (W) is used as the armor material of the International Thermonuclear Experimental Reactor (ITER) divertor and is regarded as the potential first wall material of future fusion reactors. One of the key challenges for the successful application of W in fusion devices is effective control of W at an extremely low concentration in plasma. Understanding and control of W erosion are not only a prerequisite for W impurity control, but also vital concerns to plasma-facing component (PFC) lifetime. Since the application of ITER-like water-cooled full W divertor in EAST in 2014, great efforts were made to investigate W erosion by experiment and simulation. A spectroscopic system was developed to provide a real-time measurement of W sputtering source. Both experiment and simulation results indicate that carbon (C) is the dominant impurity causing W sputtering in L-mode plasmas, which comes from the erosion of C plasma-facing material (PFM) in the lower divertor and the main chamber limiters. The mixture layer on the surface of W PFCs formed through redeposition or the wall coating can effectively suppress W erosion. Increasing the plasma density and radiation can reduce incident ion energy, thus alleviating W sputtering. In H-mode plasmas, control of edge localized mode (ELM) via resonant magnetic perturbation (RMP) proves to be capable of suppressing intra-ELM W erosion. The experiences and lessons from the EAST W divertor are beneficial to the design, manufacturing and operation of ITER and beyond.