Abstract
Atmospheric plasma spraying was employed to prepare anode, cathode, and Y2O3-stabilized ZrO2 (YSZ) electrolyte to aim at reducing manufacturing cost. YSZ electrolytes were deposited on the anode at different deposition temperatures of 200 °C, 400 °C and 600 °C to optimize the gas tightness of plasma-sprayed YSZ electrolyte. The influences of the deposition temperature on the microstructure and gas-tightness of plasma-sprayed YSZ electrolyte were investigated. The effect of microstructure and the gas-tightness of YSZ electrolyte on the open circuit voltage and the output performance of solid oxide fuel cells (SOFCs) were examined. The results showed with the increase of deposition temperature, the porosity of YSZ electrolytes almost decreased by about 80% and the microstructure of YSZ electrolytes changed from the typical lamellar structure to the continuous columnar crystal structure. At a deposition temperature of 600 °C the gas permeability decreased to 1.5 × 10−7 cm4gf−1s−1, and the highest open circuit voltage can reach 1.026 V, indicating the applicability of the as-sprayed YSZ directly to the SOFC electrolyte.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
