Plantar pressure gradient and pressure gradient angle are affected by inner pressure of air insole.

Abstract

Clinically, air insoles may be applied to shoes to decrease plantar pressure gradient (PPG) and increase plantar gradient angle (PGA) to reduce foot ulcers. PPG and PGA may cause skin breakdown. The effects of different inner pressures of inflatable air insoles on dynamic PPG and PGA distributions are largely unknown in non-diabetics and people with diabetes. This study aimed to explore the impact of varying inner air insole pressures on PPG and PGA to establish early mitigation strategies for people at risk of foot ulcers. A repeated measures study design, including three air insoles (80mmHg, 160mmHg, and 240mmHg) and two walking durations (10 and 20min) for a total of six walking protocols, was tested on 13 healthy participants (height, 165.8 ± 8.4cm; age, 27.0 ± 7.3years; and weight, 56.0 ± 7.9kg, BMI: 20.3 ± 1.7kg/m^2) over three consecutive weeks. PPG, a measurement of the spatial variation in plantar pressure around the peak plantar pressure (PPP) and PGA, a variation in the gradient direction values at the three plantar regions, big toe (T1), first metatarsal head (M1), and second metatarsal head (M2), were calculated. This study indicated that PPG was lower at 80mmHg air insoles after 20min of walking in the M1 region (p = 0.010). The PGA in the M2 increased at an air insole of 80mmHg compared to 240mmHg (p = 0.015). Compared to 20min, the 10min walking duration at 240mmHg of air insole had the lowest PPG in the M1 (p = 0.015) and M2 (p = 0.034) regions. The 80mmHg air insole significantly lowered the PPG compared to a 160mmHg and 240mmHg air insole. Moreover, the 80mmHg air insole significantly decreased PPP and increased PGA compared to the 160mmHg and 240mmHg air insole. A shorter walking period (10min) significantly lowered PPG. The findings of this study suggest that people with a higher risk of foot ulcers should wear softer air insoles to have a lower PPG, as well as an increased PGA.