Plant-Input-Mapping Discretization Method for a Feedback System in the State-Space Form

Abstract

AbstractThe paper proposes the digital redesign technique called plant-input-mapping (PIM) method for a feedback system described in the state-space form. The PIM method, which was originally presented in the transfer function form, focuses on the plant input signal via the plant input transfer function (PITF) and discretizes it so as to satisfy the control zero principle in the resulting discrete-time closed-loop system, which leads to guaranteeing the closed-loop stability for any nonpathological sampling interval. In accordance with this approach, the proposed PIM method focuses on the control zeros included in the plant input signal. The paper proves that the matched-pole-zero discrete-time model of the plant input state-equation (PISE) satisfies the control zero principle with the step-invariant model of the plant. Then, when the matched-pole-zero model is set as the target of model matching, the parameters of the state-space PIM controller employing the observer-based dynamic state-feedback can systematically be determined from the underlying continuous-time closed-loop system with guaranteed stability. This discretization process can immediately be applied to a state-feedback system and a class of multi-input multi-output systems without any modification, which cannot be discretized by the conventional PIM methods. The discretization performance of the proposed PIM method is evaluated through illustrative examples with comparable digital redesign methods, which reveal that the proposed method performs a good reproduction of the characteristics of the underlying closed-loop system.