Abstract
This paper presents a planning-level methodology for the analysis of freeway facilities. The proposed approach is based on and compatible with the operational method of the Highway Capacity Manual 2010 (HCM 2010). The approach is specifically constructed with the intent to minimize input data requirements. The method covers both under- and oversaturated flow conditions and produces estimates of travel time, speed, density, and level of service. The underlying methodology relies on developing a relationship between a basic freeway segment's delay rate per unit distance and its demand-to-capacity ratio. For weaving segments, the study develops capacity adjustment factors on the basis of volume ratio and segment length. With these factors, demand-to-capacity ratios on weave segments were adjusted and the segment was treated similarly to a basic freeway segment. For merge and diverge segments, a novel methodology is proposed to estimate their capacity on the basis of demand level, free-flow speed, and space mean speed. Subsequently, capacity adjustment factors are calculated on those segments and their demand-to-capacity ratios are adjusted accordingly. The proposed approach is applied to two examples in the HCM 2010 and produced very promising results. For undersaturated flow conditions, facility travel time is at most 3.4% and density was at most 1.1% at variance from the results found by applying the HCM 2010 operational methodology. The corresponding differences for oversaturated conditions are 6.7% and 13.0%, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have