Abstract

The earthquake has become one of the most lethal problems in Indonesia, especially across the ring of the fire zone. On September 30th, 2009, an earthquake with a magnitude of 7.6 SR occurred, triggering tsunami and liquefaction. The liquefaction potential and tsunami forces need to be mitigated when an earthquake happens to reduce the risk. This study designs the building foundation that can endure the loads from an earthquake, tsunami, and liquefaction in the Air Tawar estuary of Padang City. The soil profile and liquefaction potential can be identified with CPT (Cone Penetration Test) data. After identifying the liquefaction potential, the upper structure was designed to consider the earthquake load and tsunami waves according to FEMA P-464 (2012). Afterward, design the foundation dimensions based on the ultimate load from the upper structure, wherein the amount of the settlement should be smaller than the tolerable soil settlement. The method used in the paper is taking the CPT data in the Air Tawar Estuary. After analyzing the liquefaction potential, making an upper structure design with ETABS 2016, recapitulate the maximum joint reaction to design the foundation that can withstand the ultimate load, and calculate the amount of soil settlement. Thus the design of the upper structure and lower structure take into account liquefaction. The amount of soil settlement obtained in the building design is still within the tolerance range of 9.79 mm, where the maximum limit of reduction is 32m.

Highlights

  • The building is known as one of the fundamental human needs

  • On research conducted an analysis using CPT method, which focused on the correlation between cone penetration against cyclic stress ratio according to Seed and Idris chart which described the soil boundary whether the liquefaction occurs or not

  • It is concluded that the research area has a considerable liquefaction potential [2]

Read more

Summary

Introduction

The building is known as one of the fundamental human needs. These days, the building can become the most dangerous place during natural disasters, especially earthquakes and tsunamis. Cyclic load from an earthquake can trigger liquefaction, especially in the area around the coast and estuary river. Putra et al researched liquefaction potential at GOR Haji Agus Salim and Lapai, Padang City. On research conducted an analysis using CPT method, which focused on the correlation between cone penetration against cyclic stress ratio according to Seed and Idris chart which described the soil boundary whether the liquefaction occurs or not. Based on previous research in Padang city, in planning the foundation for high-rise buildings and considering the tsunami load, it is necessary to consider soil conditions in areas with liquefaction potential

Liquefaction Potential Analysis
Earthquake
Tsunami
Pile Foundation
Analysis and Discussion
Building structure data
Load analysis
Additional retained water loading on elevated floors
Foundation bearing capacity
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call