Planar Translational Cable‐Direct‐Driven Robots

Abstract

AbstractWe present the simulated dynamics and control of a planar, translational cable‐directdriven robot (CDDR). The motivation behind this work is to improve the serious cable interference problem with existing CDDRs and to avoid configurations where negative cable tensions are required to exert general forces and moments on the environment and during dynamic motions. Generally for CDDRs the commanded rotations are more demanding than commanded translations in terms of slack cable conditions. Therefore we propose a translational CDDR whose end‐effector may be fitted with a traditional serial wrist mechanism to provide rotational freedom (assuming proper design to resist the moments). Only the translational CDDR is considered in this article, including kinematics and statics modeling, statics workspace (wherein all possible Cartesian forces and moments may be exerted with only positive cable tensions), plus a dynamics model and simulated control for planar CDDRs. Here we focus only on planar CDDRs, to clearly demonstrate our dynamics and control work; we will extend this work to spatial CDDRs in the future. Examples are presented to demonstrate simulated control including feedback linearization of the four‐cable CDDR (with one degree of actuation redundancy) performing a Cartesian task. An on‐line dynamic minimum torque estimation algorithm is introduced to ensure all cable tensions remain positive for all motion; otherwise slack cables can result from CDDR dynamics and control is lost. © 2003 Wiley Periodicals, Inc.