Abstract
Recent studies focus on enhancing the mechanical features of natural fiber composites to replace synthetic fibers that are highly useful in the building, automotive, and packing industries. The novelty of the work is that the woven areca sheath fiber (ASF) with different fiber fraction epoxy composites has been fabricated and tested for its tribological responses on three-body abrasion wear testing machines along with its mechanical features. The impact of the fiber fraction on various features is examined. The study also revolves around the development and validation of a machine learning predictive model using the random forest (RF) algorithm, aimed at forecasting two critical performance parameters: the specific wear rate (SWR) and the coefficient of friction (COF). The void fraction is observed to vary between 0.261 and 3.8% as the fiber fraction is incremented. The hardness of the mat rises progressively from 40.23 to 84.26 HRB. A fair ascent in the tensile strength and its modulus is also observed. Even though a short descent in flexural strength and its modulus is seen for 0 to 12 wt % composite specimens, they incrementally raised to the finest values of 52.84 and 2860 MPa, respectively, pertinent to the 48 wt % fiber-loaded specimen. A progressive rise in the ILSS and impact strength is perceptible. The wear behavior of the specimens is reported. The worn surface morphology is studied to understand the interface of the ASF with the epoxy matrix. The RF model exhibited outstanding predictive prowess, as evidenced by high R-squared values coupled with low mean-square error and mean absolute error metrics. Rigorous statistical validation employing paired t tests confirmed the model's suitability, revealing no significant disparities between predicted and actual values for both the SWR and COF.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have