Abstract
AbstractThe pitting corrosion resistance of AISI 304 stainless steel (SS), which was laser melted in both nitrogen and argon atmosphere, was studied using the potentiodynamic anodic polarisation method. An attempt was made to introduce nitrogen onto the surface layers by melting in nitrogen atmosphere and argon atmosphere using a continuous wave CO2 laser as the heat source at a power output of 3·06 kW at the laser head. The pitting corrosion resistance was determined by measuring the critical pitting potential during anodic polarisation. Secondary ion mass spectrometry (SIMS) was carried out on the laser melted surface to characterise the chemical composition. It was found that the pitting corrosion resistance of 304 SS was improved when laser surface melting was carried out in argon and was improved further when melting was carried out in nitrogen atmosphere. However, the improvement in pitting corrosion resistance in laser melted material was observed only in the reabraded condition and the pitting cor...
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
