Abstract
AbstractThe pine needle composites using isocyanate prepolymer were evaluated for their dimensional stability, flammability characteristics, biological resistance, and thermoacoustic properties. The thickness swelling and linear expansion of the composite panels affected significantly under wet conditions. The optimum flammability characteristics of the pine needle fibers were obtained at the retention of 7.48 kg/m3urea phosphate on their surfaces. During natural decay, the treated pine needle composites exhibited 4–8% weight loss compared to 9–13% for the untreated ones. The loss of internal bond strength in both the treated and untreated samples exposed to fungus culture ranged between 35 and 60% only. Termites caused ∼6% less weight loss than the untreated samples showing their moderate resistance behavior. The thermal conductivity and sound transmission loss of samples were 0.136 W/m K and 26.51 dB, respectively, showing their adequate insulation properties. It is concluded that isocyanate bonded pine needle composites can be suitably used as panel products in buildings. POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.