Abstract
Traditional hot water blanching has a slow heat transfer rate, whereas radiofrequency (RF) heating has the advantages of a much faster heating rate and a higher penetration depth. In the present study, RF heating was applied to improve heating uniformity for subsequent blanching experiments involving potato cuboids. Potato cuboids were treated in a pilot-scale, RF heating system (27.12 MHz, 6 kW) under different operating conditions. The dielectric constant increased first and then decreased with temperature, whereas the loss factor increased as the temperature increased. The results of the present study reveal that the electrode gap, sample height and NaCl solution had significant effects (P < 0.05) on the temperature distribution and heating uniformity of the sample after RF heating. The optimum RF heating uniformity was obtained at an electrode gap of 120 mm, a sample height of 60 mm and when immersed in NaCl solution of 0.5 s m-1 . The central heating pattern was presented in a sample. Cold spots were located at the edge of the top surface of the sample. The present study shows the great potential of RF heating for the blanching of vegetables. Future studies should aim to determine changes in the texture and nutrient contents of vegetables during RF heating. © 2017 Society of Chemical Industry.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have