Pilot-scale studies on the effect of bromine addition on the emissions of chlorinated organic combustion by-products

Abstract

The addition of brominated organic compounds to the feed of a pilot-scale incinerator burning chlorinated waste has been found previously, under some circumstances, to enhance emissions of volatile and semivolatile organic chlorinated products of incomplete combustion (PICs) including polychlorinated dibenzo- p-dioxins and polychlorinated dibenzofurans (PCDDs/Fs). This phenomenon appears to be sensitive to temperature and combustion conditions. This paper reports on a study to evaluate the emissions of organic combustion by-products while varying amounts of bromine (Br) and chlorine (Cl) are being fed into a pilot-scale incinerator burning surrogate waste materials. The surrogate waste was fed at a constant molar halogen input rate, with varying Br/Cl molar ratios. In these tests, an approximately 30% decrease in the total PCDD/F concentrations due to the addition of Br was observed. This decrease appears to be a decrease only in the chlorinated dioxin and furan species; other halogenated dioxins and furans were formed instead. PCDD/F homologue distribution shifted towards the higher chlorinated species. Perhalogenated or nearly perhalogenated mixed bromo-chloro furans were also observed in quantities that could potentially account for the observed decrease in PCDDs/Fs. This research illustrates the need for careful trial burn planning if Br will be present in the facility's feedstock during normal operation.