Abstract
As a burgeoning technology based on conventional clarifier technology, pellet fluidized bed (PFB) technology has been widely applied in kinds of high SS water treatment process. In this paper, PFB process was used to thicken the alum sludge in a water plant in south China with scale of 1.0~2.5m3/h. The experimental results showed that, increasing flocculent (PAM) dosage could decrease outlet turbidity, and average up pellets settling behavior. Under the experimental condition, there exist negatively linear relationship between process maximum flow rate which ranged from 1.6m3/h to 2.2 m3/h and raw sludge concentration. Moreover, because of the improvement of pH environment and flocs chemical structure, additional lime dosage would enhance maximum surface loading and save PAM dosage. The pilot scale experiment proved that by applying PFB, alum sludge conditioning could achieve satisfied results characterised by high surface loading, low outlet turbidity, and high concentration thicken sludge with fine dewaterability.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
