Abstract
In this study, (Na0.465K0.465Bi0.07)(Nb0.93Ti0.07)O3 ceramics with MnO2 addition were prepared by conventional mixed oxide method. The effects of MnO2 addition on the structural and electrical properties of the specimens were investigated for the application of piezoelectric devices. As the results of X-ray diffraction analysis, all specimens showed the typical polycrystalline perovskite structure without presence of the second phase. Sintered densities increased with increasing the addition amount of MnO2 and the specimen added with 0.06 mol% of MnO2 showed the maximum value of 4.87 g/cm3. Average grain size increased and densification increased with an increasing of MnO2 contents. The electromechanical coupling factor, dielectric constant, dielectric loss, d33 and Curie temperature of the 0.06 mol% of MnO2 doped (Na0.465K0.465Bi0.07)(Nb0.93Ti0.07)O3 specimens were 0.32, 1309, 0.016, 122 and 465 °C, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
